These High-Strength 45 degree hose bends can be used for joining your intake pipe to the throttle body assembly, air metering assembly, intercooler, BOV pipe, or turbo inlet/outlet. They can also be used for custom compressor housings, intercooler or inlet piping for turbo/supercharged car or a custom cold air intake system for your car.
The Hose Dimensions are as follows:
The Inner Diameter can be ordered in sizes ranging from 2.00" to 3.50". The Full Hose size is held throughout the 45 Degree Bend
High quality 4-ply or 5-ply fabric reinforced silicone can be cut to any length All of our silicone parts are Genuine 4-Ply construction - that's 5 layers of silicone plus 4 layers of reinforcement for 9 total layers!
Heat tolerance: -40° to 392° Fahrenheit
Burst Pressure: 200 PSI
Working Pressure: 50 PSI
Wall Size: 4 mm - 5 mm
Requires two matching sizes of our T-Bolt Hose Clamps
This item is available in Red in the following sizes: 2.00", 2.25", 2.50", 2.75", 3.00" and 3.50". Please select your size from the drop down box below.
Black and Blue are available in a broader variety of sizes ranging from 1.00" to 4.50" and can be found
here.
Available Options: |
Silicone Hose Size: |
|
|