TU "Ultimate Performance” 6 Puck Ceramic Street n' Strip Stage II (Blue) Clutch kits are made exclusively for us and to our unique specifications. Most other clutch shops prefer to only upgrade the disk leaving you with a stock pressure plate. They will not go the extra mile that we do because they simply fail to acknowledge the true potential of these vehicles.
There are a few ways to enhance the performance of a clutch. One way is to increase the clamp load force by modifying the pressure plate. The other is by upgrading the disk material to increase the dynamic coefficient of friction. We combine the high torque capacity of our Stage II (Blue) modified pressure plates with the aggressive 6-Puck ceramic disk to bring you a clutch that will support upwards of 336 Ft Lbs of Torque while still providing extended disk life. The materials used in the construction of our performance clutch kits were chosen to exceed the needs of a true Street n’ Strip Turbo-Dodge vehicle.
How do TU 6-Puck Ceramic clutch kits differ from our competitors:
· Retain Stock pedal feel
· Enhanced Torque Capacity by modifying PP fulcrum point
· Coefficient of friction is approximately 40% higher then Organic disks
· TU ceramic disk pucks are thicker then industry standard providing longer clutch life
Our Blue Pressure Plates are unique for many different reasons. First of all we change the pivot point to enhance clamping load force without increasing pedal pressure. This process provides maximum torque load capacity while also providing a smoother clutch engagement with minimal chatter or shudder. TU does something else that most others don’t want to do. The wearable portion of our disks is 40% thicker then the industry standard. We do this to enhance clutch life and it’s why you cannot mix TU clutch kit pressure plates and disks with other brands. With proper break-in the thicker ceramic puck material will prolong the life of your clutch so you can spend more time behind the wheel of your TD vehicle then under it replacing parts. Our Ceramic clutches can be used in both Street and Racing applications with street tires or slicks.
If you are unsure of the right clutch for your unique application we STRONGLY recommend contacting us prior to purchasing any of our clutch products to avoid selecting the wrong one for your vehicle.
IMPORTANT NOTE: For this clutch to work properly it is necessary to confirm that your input shaft bearing is not worn and within factory tolerances. Changing the pivot point of the pressure plate reduces plate lift so it is VERY important that you minimize disk wobble. This is a simple procedure. Contact us should you need assistance in doing this
For use with small and large spline transmissions including A520, A523, A525, A555, A568 and early VNT A568. Please choose the category with your transmission below.
|'91 up 16-V Crank Sensor Engine:
|* Year and Model of Transmission: